Warom anti-explosion stop start arm
Warom anti-explosion stop start arm is an anti-explosion control equipment that is often used to turn on and off engines in industrial and explosive environments.
Warom anti-explosion stop start
The WAROM explosion-proof on-off switch is an explosion-proof control equipment that is often used to turn on and off engines in industrial environments prone to explosions.
Warom anti-explosion stop start arm is available in two forms, metal body and bakelite body. The body of the explosion-proof step starter push box is made of bakelite or (Glass Fiber Reinforced Polyester (GRP).
Technical specifications Warom anti-explosion stop start arm
- China
- Manufacturer: warom
- Material: Glass Fiber Reinforced Polyester (GRP
- Explosion-proof box protection: II 2 G Ex De IIC T6
- Box dust protection: Ex Tb IIIC T80
- Degree of protection: IP 65
- Zone: Zone 1 (Zone 2
- Contact amperage: The contacts used in this explosion-proof box model are 6 amps.
- The number of contacts used under each explosion-proof fuse is two contacts, which can be a combination of NO and NC contacts depending on the request.
- The number of bushings: depending on the customer’s request, it can be in three modes: single house, two houses and three houses.
- Voltage: The maximum working voltage of the BZA8050 explosion-proof control box is 415 volts.
Certificates and standards
- ATEX anti-explosion certificate and an international IECEx certificate.
BZA8050 anti-explosion stop-start push button is in accordance with the following anti-explosion standards:
- EN 60079-0:2009, EN 60079-1:2007, EN 60079-5:2007, EN 60079-7:2007, EN 60079-31:2009
- IEC 60079-0:2007, IEC 60079-1:2007, IEC 60079-5:2007, IEC 60079-7:2006, IEC 60079-31:2008
You can contact our consultants to get information about buying this product. You can also visit the ex proof website to buy Explosion-proof boxs and all kinds of explosion-proof equipment.
Show only reviews in English (0)
Reviews
There are no reviews yet.